SOYA Methyl Ester (SME)

SOYA Methyl Ester (SME) – A Versatile and Eco -Friendly Solution

Soya Methyl Ester or Methyl Soyate is a methyl ester derived from soybean
oil, and is a methyl ester mixture made up of saturated and unsaturated C16 to C18 fatty
acids.

SME is a low-cost, readily biodegradable alternative that can replace most of the
traditional chlorinated and petroleum solvents. Methyl soyate finds use as a carrier
solvent and adjuvant.

SME has a high solvency with a Kauri-butanol (KB) value of around 58 and has low
toxicity. In comparison to most commercial solvents, SME is safer to handle and store
due to its high flashpoint of approximately 170 degrees Celsius and high boiling point of
well over 200 degrees Celsius. In addition, soya methyl ester is not an ozone-depleting
chemical (ODC), hazardous air pollutant or volatile organic compound (VOC).

Get a Quote
SOYA Methyl Ester (SME)

About Natural Ester Oil

Bio-based soy methyl ester solvent without any additives produced from 100% natural whole soybean oil. This grade is single distilled SME is an effective green solvent for agriculture applications including crop protection, pesticides, and adjuvants. SME aids in rain- fastness, provides excellent wetting and spreading, and aids in the penetration for actives onto plants waxy membrane.

Also known as :

  • SME
  • Methyl Soyate
  • Soy Methyl Ester
  • Soybean Ester

Soy methyl ester

Properties : Non-flammable, low toxicity, high flashpoint, high boiling point, not an ozone- depleting chemical, not a hazardous air pollutant, not a volatile organic compound
Uses : Lubricity component in diesel fuel, cleaning agent, solvent for printing, chemical formulating, and adhesives, biodiesel additive, base stock, lubricants, parts cleaning, asphalt cleaner, hair gel, skin care, wax, candles, land remediation
Environmental benefits : Biodegradable, non-toxic, low VOC content, does not contain compounds that contribute to global warming, not listed on the state of California's Proposition 65 List
Soy methyl ester is a renewable resource that can replace most traditional chlorinated and petroleum solvents. It is safer to handle and store than most commercial solvents due to its high flashpoint and high boiling point.
Soy methyl ester (SME) is a type of fatty acid methyl ester (FAME) derived from soybean oil. It is commonly used in various applications, particularly as a biodiesel, due to its renewable and environmentally friendly nature. Here’s a breakdown of its key features and uses:

Key Features :

  • Renewable and Biodegradable : Sourced from soybean oil, it is a renewable resource and decomposes naturally.
  • Non-toxic : Compared to petroleum-based fuels and solvents, SME is much less harmful to humans and the environment.
  • Low Emissions : Biodiesel made from SME produces lower greenhouse gas emissions compared to fossil fuels.
  • Good Solvent Properties : It is widely used in industrial and cleaning applications.

Applications :

Biodiesel :

SME is a primary feedstock for biodiesel production. It is often blended with petroleum diesel to reduce emissions.

Solvent :

Used as an industrial solvent for paints, coatings, and cleaning agents.

Lubricant :

Acts as a base oil or additive in lubricants.

Agricultural :

Used in pesticides, herbicides, and as an emulsifier in formulations.

Chemical Intermediates :

Employed in the production of Chlorinated Wax , surfactants, resins, and other chemicals.

Substitute diesel :

Transportation fuel :

Power generation fuel :

Agrochemical Solvents :

Polymers :

Lubricants :

Coating :

Food :

Corrosion Inhibitors :

Paint Removers :

Degreasers :

Agricultural Adjuvants :

Metalworking fluids :

Why Choose SHRI PARTH Natural Ester Oil?

Premium Quality : Processed to meet global industry standards.
Sustainability : Sourced from renewable and eco-friendly raw materials.
Cost-Effective : Delivers long-term savings with superior performance.
Custom Solutions : Tailored formulations and packaging to suit your needs.

Specifications :

Appearance : Clear, light yellow liquid
Purity: ≥ 99%
Flash Point : ≥ 160°C
Ester Content : ≥ 97%
Viscosity : 4.0–6.5 cSt at 40°C
Packaging : Drums (200L), IBC totes (1,000L), or bulk tankers